Category
Silicone Adjuvant
KT-3308
Modified polyester trisiloxane
Quantity:
Description:
The main component is modified polyether trisiloxane, as a non-ionic surfactant. KT-3308 can effectively reduce the
angle of the spray liquid in contact with the leaf surface, reduce the surface tension of the spray liquid, promote the
surface expansion rate of the liquid and expand the expansion area of the liquid. At the same time, it has strong
adhesive force and is resistant to rainfall; it can accelerate the absorption of spray liquid by leaf pores and reduce the
use of spray liquid.
Property:
*Reduce the dosage of spray liquid
* Strong spreading
* Improve penetrating
* Strong adhesion
*Environmental friendly
Technological Index：
Appearance Colourless to light amber liquid
Surface tension（25℃，0.1%，mN/m） <20.5
Cloud point（1% wt，℃） <10
Ionic Type Non-ionic
Viscosity（25℃，mm2/s） 25-50
Usage:
1. In drum mixture:
Suggested dosage is 0.01%-0.1%, adjust pH 6-8, better to use within 24 hours.
For example: add 5g KT-3308 per 20kg Spray liquid, stir well.
2. In persiticide agent:
Adjust pH into 6.5-7.5, suggested dosage 0.1-5%;
3. If need to improve efficiency of systemic pesticide, add extra KT-3308, suggested dosage is as following:
Insecticide: 0.025%～0.1%
Herbicides: 0.025%～0.15%
Bactericides: 0.015%～0.05%
Plant growth regulator: 0.025%～0.05%
When using, dissolve the pesticide first, add 80% water and mix well; then add KT-3308, and add 20% water and mix
well. It is recommended that when using KT-3308, water should be reduced to 1/2 and the amount ofpersticide used per unit area should be reduced to 70-80% of the conventional dose.
Package and Storage: 200 kg plastic drum and 1000kg IBC tank. Storage life is 24 months.
Keep sealed in dry, cool area; away from Alkaline, Acid and flames.
Send Message